PT Berkat Airindo Kharisma · Official Innovek distributor

Is your cooling tower doing okay?

Most owners are not sure, and that uncertainty costs money. We check your whole system, take all the data, and show you where you can save energy, water and cost.

Check my cooling tower See the common problems

1 · Cooling tower test

Not sure how well your cooling tower performs? We can test it.

We can do a cooling tower test based on CTI, and assess your cooling tower. Then we make a report of what we found, and help you solve the problem.

Cooling tower test

2 · Energy saving

Is your power bill climbing? We can cut it.

Fans and pumps often run at full speed all day. We cut the electricity your cooling tower uses with air flow management, energy saving blades and efficient pumps, without cutting its cooling.

Energy saving service

3 · Upgrade cooling tower

Is your cooling tower under-rated? We can upgrade it.

We take your existing cooling tower and upgrade it to the rating your plant needs, without too much change to the tower. Often with the same power, the TANDEM blade gives more airflow.

Upgrade cooling tower

4 · Service & maintenance

Gearbox noisy, shaking or broken?

Send your gearbox to our workshop. We open it, find which parts are broken, and give you a report and a list of parts to change. We can also supervise the alignment of your gearbox and blade on site.

Service & maintenance

CheckWe visit and measure how your whole system performs today.

ExplainWe show you the findings in plain language, with a report.

SolveWe recommend the upgrade or repair that fits your plant and budget.

SupportWe supply, install and look after the equipment.

Does this sound like your plant?

Almost every cooling tower hides the same problems

Most owners never see them, and they quietly cost money every month.

Energy is wasted

Fans and pumps often run at full speed all day, with blades and pumps that are not efficient. The power bill pays for it, month after month.

Water is lost

Water escapes through the fan stack as droplets. Every drop has to be replaced with treated makeup water, which you either treat yourself, with more chemicals, or buy from the government supply. Either way it costs money, and the droplets also rust the equipment around the factory.

The tower is under-rated

Many towers are too small for the heat they now have to remove. The water does not get cold enough, and the plant pays for it in lower output and higher cost.

Nobody sees it

A cooling tower is usually run until something fails. Owners rarely measure how well it performs, so the problem stays hidden.

Recognise a problem?

Tell us what you see on WhatsApp. We will tell you what to check first.

Message us now

How we help

Three ways we cut your costs

All three lead to the same result: a plant that runs well on less energy, less water and less money.

Cut your power bill

Air flow management, energy saving blades and efficient pumps cut the electricity your cooling tower uses, without cutting its cooling.

Keep your water

Drift eliminators keep water inside the tower, so you make or buy less treated makeup water, use fewer chemicals and get less rust.

Fix under-rated towers

We assess why a tower cannot keep up, and upgrade it without too much change to the cooling tower.

Our principals

Backed by trusted brands

Find out how much you could save

Message us today. We will tell you how we can check your cooling tower, and where you could save energy, water and cost.

Chat on WhatsApp Call +62.811.1509569 Contact us